Jining Qingan Industrial and Mining Equipment Co., Ltd.

Jining Qing'an pays attention to product details, light and practical pneumatic high-pressure oil injection machine year-end promotion
Pneumatic high-pressure oil injection machine price pneumatic high-pressure oil injection machine in stock pneumatic high-pressure oil injection machine accessories
Pneumatic high-pressure oil injection machine use and Maintenance:
Start the air compressor and prepare the compressed air. It is strictly prohibited to use flammable gas as power, otherwise it may explode and cause personal injury.
, loosen the quick clamp (or screw), grasp the handles on both sides of the oil storage tank cover, and rotate it to open the tank cover.
Put the grease into the oil storage tank and fill it as needed. To prevent bubbles from forming, the grease in the cylinder should be pressed tightly and the grease surface should be smoothed.
. Press the oil-pressing rubber plate against the grease surface, cover the cylinder cover, and fasten the quick clamp (or screw)
. Install the quick-change joint on the air source pipeline.
. Connect the oil injection pump and oil injection steam with high-pressure hoses. When connecting, all connecting parts must be cleaned. Use a wrench to tighten the nut to avoid oil leakage.
The compressed air must be filtered to prevent sand and dust in the air from entering the air pump and causing wear to the gas distribution slider, cylinder and other components.
Use base grease according to seasons, winter: -, spring and autumn: -, summer:.
High-pressure hoses are not allowed to be bent forcefully or crushed by heavy objects during use to avoid damage.
When working and taking a break, the quick connector should be removed and the oil injection trigger should be pulled to drain the oil to reduce the oil pressure in the equipment to extend the service life of the high-pressure hose.
The air pump needs to be filled with lubricating oil regularly.
During the disassembly and repair process, the accuracy of the dismantled parts must not be damaged, and the surface of the parts must be protected from scratches.
Do not start the machine without load for a long time when there is insufficient oil in the oil storage tank to prevent the plunger oil pump from heating up and damaging the components.
. Regular cleaning and maintenance work should be done regularly, and the entire oil system should be cleaned regularly. Remove the oil filling nozzle, repeat the cycle with clean oil several times, rinse away the debris in the pipeline, and maintain the oil storage cylinder. Cleaning of internal oil.
Application range of pneumatic high-pressure oiling machine: lubricating oil filling for large machinery, vehicles, etc.
Working pressure resistance:
Extrusion pressure:
Weight:
Specifications:
/>Contact: Manager Lu
Mobile:
:
Landline:
Fax: